chemexper.net

Synthesis

Catalog of Custom Synthesis Oganic Synthesis Bio-synthesis Companies Supplier Manufacturer And Distributor, Material Safety Data Sheets, Chemical Substance Property Information, Raw Material Laboratory Reagent Equipment Solution Intermediate Specialty Chemicals And So On.

HOME| Group A | B

2-Amino-5-diethylaminopentane

2-Amino-5-diethylaminopentane

  • Novoldiamine
  • 1-Diethylamino-4-aminopentane
  • 4-Aminopentyldiethylamine
FormulaC9H22N2 (C9H22N2)
Description A colorless liquid.
Uses Used to make other chemicals.

Registry Numbers and Inventories.
CAS140-80-7
EC (EINECS/ELINCS)205-435-1
RTECSXE1900000
RTECS class Z Other (Z)
UN (DOT)2946
Merck12,6819
Beilstein ref.4-04-00-01308
Listed on the Toxic Substancs Control Act (TSCA).
Listed on Canadian Non-Domestic Substances List (NDSL).

Properties.
Formula mass158.29
Boiling point, °C200 - 200.5
Density0.819 g/cm3 (20 °C)
Solubility in waterSoluble
Refractive index1.4442 (20 °C)

Hazards and Protection.
Storage Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Protection Wear appropriate protective gloves, clothing and goggles.
Respirators Wear positive pressure self-contained breathing apparatus (SCBA).
Small spills/leaks Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard.
Stability No data.
Incompatibilities Incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides.

Fire.
Flash Point,°C68
Fire fighting Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Keep run-off water out of sewers and water sources.
Fire potential May burn but does not ignite readily.
Hazards When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. May polymerize explosively when heated or involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form.
Combustion products Fire may produce irritating, corrosive and/or toxic gases.

Health.
Exposure effects
Ingestion
See Inhalation.
Inhalation
TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Effects of contact or inhalation may be delayed.
Skin
Contact with molten substance may cause severe burns to skin and eyes. See Inhalation.
First aid 
Ingestion
Seek medical assistance.
Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.
Skin
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.

UN number2946
Response guide
Hazard class6.1
Packing GroupIII

Chemexper Information Net Chemexper.net
Group A| B